Code Definition

C1165 — Speed Wheel Sensor RR Input Circuit Failure

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Generic

About C1165

C1165 is a manufacturer-specific chassis diagnostic trouble code. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1165 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1165 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

This code relates to the park brake switch circuit, specifically the primary switch or first pole used to confirm the applied (on) state of the parking brake. Many systems use a dual switch or dual contact arrangement so the control module can cross check the park brake state, and switch 1 provides the main applied signal. DTC C1165 sets when the control module detects an electrical failure in the park brake switch 1 applied circuit, such as an open circuit, a short to ground, a short to voltage, or a signal that disagrees with the companion switch or with vehicle data. The park brake switch i...

Join TaT to view the complete code information and diagnostic details.

Quick Facts