Code Definition

P0165 — O2 Sensor Circuit Slow Response (Bank 2 Sensor 3)

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0165

P0165 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0165 is stored, the module has detected a signal or supply voltage lower than the expected operating range; a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0165 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0165 fault code is set when the Engine Control Module (ECM) detects that the oxygen sensor in Bank 2, Sensor 3, has a slower response time than expected. This sensor is generally located downstream in the exhaust system and is often used in vehicles with advanced emission control systems or multiple catalytic converters. A slow response in the oxygen sensor refers to its delayed adjustment in voltage output in response to changes in the oxygen content of the exhaust gas. This delay can affect the ECM’s ability to effectively monitor and control the exhaust gas composition, particularly ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts