Code Definition

C1418 — Damper RF Circuit Failure

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Generic

About C1418

C1418 is a manufacturer-specific chassis diagnostic trouble code. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1418 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1418 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The C1418 fault code indicates the suspension control module has detected an electrical fault on the right front (RF) electronic damper control circuit that does not classify as a specific short or open. Electronically controlled dampers use solenoid valves to vary internal fluid restriction in real time, adjusting ride compliance based on inputs from suspension position sensors, accelerometers, steering input, and the stability control system. This generic failure code is set when the module detects out of range coil current, intermittent open or short conditions, or a damper that fails its c...

Join TaT to view the complete code information and diagnostic details.

Quick Facts