Code Definition

C1450 — Traction Control Motor Circuit Failure

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Generic

About C1450

C1450 is a manufacturer-specific chassis diagnostic trouble code. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1450 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1450 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The C1450 fault code indicates the ABS or traction control module has detected a general electrical fault on the traction control pump motor circuit. The pump motor is used to pressurise the brake hydraulic system during ABS, traction control, and stability control interventions. Where C1449 covers a coherency mismatch between commands and observed motor state, C1450 covers a broader circuit failure including opens, shorts, or current draw outside specification when the motor is commanded. When this code is active, ABS, traction control, and stability control are typically disabled and warning...

Join TaT to view the complete code information and diagnostic details.

Quick Facts