Code Definition

C1770 — Air Suspension Vent Solenoid Output Circuit Failure

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Ford

About C1770

C1770 is a manufacturer-specific chassis diagnostic trouble code recorded for Ford vehicles. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1770 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1770 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

DTC C1770 is a Ford specific chassis code for the vent solenoid output circuit in the four wheel air suspension system used on the Expedition, Lincoln Navigator, and related models. The vent solenoid is mounted on the air compressor and drier assembly and, when energised by the air suspension control module, releases air from the system so the vehicle can lower. The module monitors the electrical state of its solenoid driver circuit, and C1770 sets when it detects an open circuit, a short, or an unexpected voltage on the vent solenoid output. When the code is set the module cannot reliably ven...

Join TaT to view the complete code information and diagnostic details.

Quick Facts