Code Definition

P0198 — Engine Oil Temperature Sensor High

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0198

P0198 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0198 is stored, the module has detected a signal or supply voltage higher than the expected operating range; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0198 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0198 fault code is set when the Engine Control Module (ECM) detects a higher than expected input signal from the engine oil temperature sensor. This sensor plays a critical role in monitoring the temperature of the engine oil, which is vital for the proper lubrication and functioning of engine components. The viscosity of the oil and its lubricating properties are significantly influenced by temperature. A high input signal could suggest a malfunction within the sensor, a short to power in the sensor circuit, or issues with the wiring or connectors. Such a condition can lead to the ECM re...

Join TaT to view the complete code information and diagnostic details.

Quick Facts