Code Definition

B1282 — Servo Motor Potentiometer Coolair Circuit Short To Battery

System: Body  |  Type: Manufacturer-Specific  |  Make: Generic

About B1282

B1282 is a manufacturer-specific body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1282 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1282 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module (BCM) or HVAC control module sets this code when it detects a short to battery condition in the cool air mode door servo motor potentiometer signal circuit. The potentiometer provides position feedback for the cool air door, and the controller monitors the signal voltage against the expected reference range of approximately 0V to 5V. When the signal pin is unintentionally connected to a battery voltage source, the reading climbs above the upper threshold and the module logs the fault. Drivers may notice the cool air door defaulting to a fixed position, incorrect airflow...

Join TaT to view the complete code information and diagnostic details.

Quick Facts