Code Definition

B1314 — Battery Saver Relay Coil Circuit Open

System: Body  |  Type: Manufacturer-Specific  |  Make: Ford

About B1314

B1314 is a manufacturer-specific body diagnostic trouble code recorded for Ford vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1314 is stored, the module has detected an open (broken or disconnected) electrical path in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1314 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module (BCM), Generic Electronic Module (GEM), or equivalent module controls the battery saver relay coil through a low side driver to power down accessory loads such as interior courtesy lamps and dome lamps after a programmed time delay, preventing battery drain when the vehicle is left switched off. DTC B1314 is set specifically when the controlling module detects an open circuit on the relay coil drive line, meaning the circuit measures high impedance and no current path can be established when the module attempts to energise the relay. The module monitors the voltage on t...

Join TaT to view the complete code information and diagnostic details.

Quick Facts