Code Definition

B1774 — Mirror Driver Up Circuit Open

System: Body  |  Type: Manufacturer-Specific  |  Make: Generic

About B1774

B1774 is a manufacturer-specific body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1774 is stored, the module has detected an open (broken or disconnected) electrical path in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1774 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module or Driver Door Module monitors the driver side power mirror motor circuits, including the up direction drive output. DTC B1774 is set when the module commands the mirror to move up but detects an open circuit on the up drive output, meaning no current is flowing through the motor winding when voltage is applied. The mirror motor is a small reversible DC motor driven through H bridge outputs in the module, and an open in the wiring, connector, or motor winding interrupts the load circuit. When this code is set, the driver mirror will fail to tilt upward when commanded, a...

Join TaT to view the complete code information and diagnostic details.

Quick Facts