Code Definition

B2150 — Power Supply #1 Circuit Short to Ground

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2150

B2150 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2150 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2150 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The B2150 fault code indicates that a body control system has detected a short to ground condition on the Power Supply #1 circuit. This circuit typically provides battery voltage to a control module, accessory motor, or sensor within a body system such as seats, mirrors, door locks, lighting, or HVAC actuators depending on the application. The control module monitors the power supply line and sets this code when the measured voltage drops abnormally low due to a direct short to chassis ground, often resulting in the affected system being disabled or operating with reduced function. When this c...

Join TaT to view the complete code information and diagnostic details.

Quick Facts