Code Definition

B2176 — Overdrive Switch Circuit Short to Vbatt

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2176

B2176 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2176 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2176 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The Body Control Module (BCM) or Transmission Control Module monitors the input from the Overdrive (O/D) Off switch, which is operated by the driver to disable the transmission's overdrive gear for towing, hill descent, or engine braking situations. DTC B2176 is set when the BCM detects a short to battery voltage (Vbatt) on the overdrive switch input circuit, meaning the signal wire is being held at battery voltage continuously rather than transitioning when the switch is pressed. The overdrive switch is normally a momentary contact that grounds the BCM input when pressed, so a continuous high...

Join TaT to view the complete code information and diagnostic details.

Quick Facts