Code Definition

B2352 — Driver Memory Power Switch Indicator Circuit Short to Battery

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2352

B2352 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2352 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2352 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The driver seat memory module monitors the indicator lamp circuit on the memory power switch to confirm that the indicators are operating correctly when a memory preset is selected. DTC B2352 sets when the memory module detects voltage on the indicator drive circuit that exceeds the expected range, indicating a short to battery voltage. The indicator is typically driven by a low side switch in the memory module, so the wire should pull to ground when active and rest at the pull up reference when off, but a permanent short to battery prevents the module from controlling the lamp. When this code...

Join TaT to view the complete code information and diagnostic details.

Quick Facts