Code Definition

B2485 — LF SIDE REPEATER LAMP OUTPUT Ckt Short to Battery

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2485

B2485 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2485 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2485 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The Body Control Module (BCM) controls the left front side repeater lamp, which is the side mounted turn signal indicator typically located on the front fender or in the exterior mirror housing. DTC B2485 is set when the BCM detects battery voltage on the output circuit to the left front side repeater lamp at a time when it should not be present, indicating a short to battery somewhere in the harness or lamp assembly. The BCM monitors the actual voltage on its lamp output line and compares it against the commanded state to detect this fault, and protects its internal driver from damage when an...

Join TaT to view the complete code information and diagnostic details.

Quick Facts