Code Definition

B2553 — Disable Signal Output Circuit Short to Battery

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2553

B2553 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2553 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2553 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The body control module uses a dedicated disable signal output to inhibit operation of a related component such as a starter relay, fuel pump relay, or passive anti theft system actuator. The module monitors the voltage on this output and compares it against the commanded state at any given time. DTC B2553 sets when the module detects that the disable signal output circuit is being held at battery voltage when it should be at ground or floating, indicating a short to battery in the wiring or downstream load. When this code sets, the controlled function (such as engine cranking, fuel delivery, ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts