Code Definition

U2000 — Audio Rear Control Unit is Not Responding

System: Network Communication  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About U2000

U2000 is a generic (obd-ii standard) network communication diagnostic trouble code. It belongs to the U-prefix family of codes, which covers inter-module network communication (CAN, LIN, FlexRay, or similar) faults.

Scanning & clearing: Network (U) codes report communication faults between modules. When diagnosing U-codes, checking the vehicle's CAN bus integrity, supply/ground at each module, and reading all modules for related faults is usually the first step.

Because U2000 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This DTC is stored by the Audio Control Module, or head unit, when it stops receiving expected messages from the rear audio control unit over the infotainment communication network. Depending on the system design that network may be a LIN bus, a low speed CAN bus, or a MOST fibre optic ring, and the rear control unit manages functions such as rear seat audio, rear controls, or a rear entertainment display. The code sets when the rear unit fails to answer polling, acknowledgements, or expected status messages within a calibrated time window. The driver may notice the rear audio or entertainment...

Join TaT to view the complete code information and diagnostic details.

Quick Facts