Code Definition

P1380 — Camshaft Position Sensor (CMP) actuator, or VCT Solenoid Valve circuit Short or Open

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Ford

About P1380

P1380 is a manufacturer-specific powertrain diagnostic trouble code recorded for Ford vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1380 is stored, the module has detected an open (broken or disconnected) electrical path in the monitored circuit; a short-circuit (voltage pulled to ground or to supply) in the monitored circuit; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1380 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Quick Facts