Code Definition

P0452 — Evaporative Emission Control System Pressure Sensor Low Input

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0452

P0452 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0452 is stored, the module has detected a signal or supply voltage lower than the expected operating range; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0452 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The ECM sets P0452 when the EVAP system pressure sensor provides a voltage signal that is lower than the expected range. This typically indicates a short to ground, a sensor failure, or a lack of proper voltage supply. The EVAP pressure sensor monitors fuel tank pressure to detect leaks and ensure proper purge operation.

Quick Facts