Code Definition

P1153 — H02S Insufficient Switching Bank 2 Sensor 1

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Isuzu

About P1153

P1153 is a manufacturer-specific powertrain diagnostic trouble code recorded for Isuzu vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1153 is stored, the module has detected a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1153 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The heated oxygen sensor (H02S) on Bank 2 Sensor 1 sits upstream of the catalytic converter on the cylinder bank that does not contain cylinder number one, and switches its output as the air fuel mixture crosses stoichiometric so the ECM can maintain closed loop fuel control on that bank. DTC P1153 sets when the ECM determines this upstream sensor is not switching between rich and lean often enough, indicating a slow or lazy response. A healthy zirconia sensor crosses between roughly 0.1 volt lean and 0.9 volt rich several times per second once warm. Insufficient switching points to a contamin...

Join TaT to view the complete code information and diagnostic details.

Quick Facts