Code Definition

P0726 — Engine Speed Input Circuit Range/Performance

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0726

P0726 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0726 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0726 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0726 code is set when the Engine Control Module (ECM) or Transmission Control Module (TCM) detects a problem with the range or performance of the engine speed input circuit. This circuit is essential for conveying the engine's rotational speed, typically measured by the crankshaft position sensor, to the ECM and TCM. The fault code indicates that the signal from the engine speed sensor is outside the expected range or is inconsistent, which can adversely affect the transmission's shift timing, engine performance, and overall vehicle operation. Such a condition can result from sensor issue...

Join TaT to view the complete code information and diagnostic details.

Quick Facts