Code Definition

P0751 — Shift Solenoid A Performance or Stuck Off

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0751

P0751 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0751 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0751 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The fault code P0751 is set when the Transmission Control Module (TCM) detects that the performance of shift solenoid 'A' is below expected parameters or the solenoid is stuck in the off position. This situation suggests that the solenoid is not operating correctly to control the flow of hydraulic fluid for appropriate gear engagement. As a result, the transmission may experience delayed shifting, failure to shift into specific gears, or may stay in a lower gear longer than normal.

Quick Facts