Code Definition

B0126 — RH panel discharge temperature malfunction

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B0126

B0126 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B0126 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The air conditioning or HVAC control module monitors the right hand panel discharge temperature sensor to measure the temperature of the air leaving the right side dashboard vents. DTC B0126 sets when the module reads an out of range or implausible signal from that sensor circuit, typically an open, a short, or a resistance value outside the expected band. The sensor is a small negative temperature coefficient (NTC) thermistor whose resistance falls as air temperature rises, giving the module the feedback it uses to trim blend door position, blower speed, and compressor cycling on the passenge...

Join TaT to view the complete code information and diagnostic details.

Quick Facts