Code Definition

B0980 — PIM detects power mode switch depressed for more than 60 Seconds

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B0980

B0980 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B0980 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The Powertrain Interface Module (PIM) — used on vehicles with push-button start and passive keyless entry systems — monitors the power mode (start/stop) switch input to determine driver requests for ignition state changes. Under normal operation the switch is momentarily depressed, and the PIM transitions the vehicle between off, accessory, on, and crank power modes. DTC B0980 is set when the PIM sees the power mode switch input asserted continuously for more than 60 seconds, which is well beyond any legitimate driver press. This typically indicates a mechanically stuck switch, a short to ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts