Code Definition

P00AC — Intake Air Temperature Sensor Signal Low - Bank 2 - Sensor 1

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P00AC

P00AC is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P00AC is stored, the module has detected a signal or supply voltage lower than the expected operating range; a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P00AC is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P00AC fault code is set when the Engine Control Module (ECM) detects a lower than expected voltage or signal from the first Intake Air Temperature (IAT) sensor in Bank 2. This sensor is responsible for measuring the temperature of the air entering the engine's intake system. The IAT sensor's data are critical for the ECM to determine air density, which influences the air-fuel mixture, ignition timing, and other engine management strategies. In engines with multiple cylinder banks, like V6 or V8 engines, Bank 2 refers to the second group of cylinders. A low signal from the IAT sensor could ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts