Code Definition

P0220 (41) — TPS Signal Error - Sensor 2

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0220

P0220 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0220 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0220 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0220 fault code is set when the Engine Control Module (ECM) detects a malfunction in the electrical circuit of the Throttle Position Sensor (TPS) or Pedal Position Sensor (PPS), specifically for the 'B' circuit. This sensor is crucial for providing data on the position of the throttle or accelerator pedal, which in turn allows the ECM to adjust the air-fuel mixture and engine power output accordingly. A malfunction in this circuit can lead to erratic or unresponsive throttle behaviour, engine stalling, or reduced driving performance. The issue could be due to a faulty sensor, wiring or co...

Join TaT to view the complete code information and diagnostic details.

Quick Facts