Code Definition

P0347 — Camshaft position sensor signal low Bank 2 sensor 1

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0347

P0347 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0347 is stored, the module has detected a signal or supply voltage lower than the expected operating range; a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0347 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The powertrain control module (PCM) sets P0347 when it detects that the camshaft position (CMP) sensor signal voltage for Bank 2, Sensor 1 is lower than the expected threshold. This can occur due to a weak or missing signal, a short to ground, or a sensor power issue. A low CMP signal can lead to poor engine performance, hard starting, or misfires.

Quick Facts