Code Definition

P0392 — Camshaft position sensor signal low Bank 2 sensor 2

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0392

P0392 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0392 is stored, the module has detected a signal or supply voltage lower than the expected operating range; a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0392 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The ECM/PCM sets this code when the signal voltage from the camshaft position sensor (CMP) on Bank 2, Sensor 2 is lower than the expected threshold. This may be caused by insufficient sensor output, a wiring issue, or a failing sensor. The CMP sensor is crucial for synchronizing fuel injection and ignition timing.

Quick Facts