Code Definition

P041B — EGR temperature signal out of range sensor 2

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P041B

P041B is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P041B is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P041B is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P041B fault code is set when the Engine Control Module (ECM) detects that the signal from the Exhaust Gas Recirculation (EGR) temperature sensor 2 is out of the expected range. This condition indicates that the sensor's readings are either too high or too low compared to what is typically expected under normal operating conditions. The EGR temperature sensor 2 is crucial for monitoring the temperature of the exhaust gases within the EGR system, integral for efficient engine operation and emission control. An out-of-range signal can result in improper functioning of the EGR system.

Quick Facts