Code Definition

P043D — Catalyst temperature sensor circuit high Bank 2 sensor 2

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P043D

P043D is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P043D is stored, the module has detected a signal or supply voltage higher than the expected operating range; a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P043D is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This fault code is activated when the engine control module (ECM) detects a voltage from the catalyst temperature sensor on Bank 2 Sensor 2 that is higher than the expected range. This condition typically suggests an electrical fault in the sensor circuit, such as an open circuit or poor connection, leading to an increased voltage signal. The ECM sets this code when the voltage exceeds a predetermined threshold, which is outside the normal operating parameters.

Quick Facts