Code Definition

P0A1D (567) — Hybrid PCM error

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Toyota

About P0A1D

P0A1D is a generic (obd-ii standard) powertrain diagnostic trouble code recorded for Toyota vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A1D is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This code with subcode 567 indicates a failure in the hybrid vehicle control ECU's internal logic for managing power distribution within the high voltage system. This logic governs how high voltage power is allocated to the subsystems such as the inverter, the motor generators, and the DC to DC converter that supplies the 12 volt system. The code is stored when the ECU detects a fault in its ability to execute or validate these control routines, such as an improper logic state, failed signal routing, or a data processing error. When set, the vehicle may fail to reach Ready, lose hybrid drive, ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts