Code Definition

P0A2D — Drive motor A temperature sensor signal high

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0A2D

P0A2D is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A2D is stored, the module has detected a signal or supply voltage higher than the expected operating range; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A2D is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The powertrain or motor control module monitors the Drive Motor A temperature sensor, a thermistor whose resistance changes with motor temperature and is used for thermal protection. DTC P0A2D sets when the module detects the sensor signal voltage exceeds the calibrated upper threshold for a sustained period. In the common pull up thermistor circuit a high signal voltage corresponds to an open circuit or abnormally high resistance, which the module reads as an implausibly low temperature, although a short to voltage can produce the same result. When the code is set the module may substitute a ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts