Code Definition

P0A46 — Drive motor B sensor signal out of range

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0A46

P0A46 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A46 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A46 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

Drive Motor B relies on a rotor position sensor, usually a resolver, to supply the inverter with rotor angle for accurate phase control of the traction motor. The inverter continuously monitors the amplitude and form of the feedback. DTC P0A46 sets when the powertrain or motor control module sees the Drive Motor B position signal outside its calibrated valid range, meaning the feedback level is too high or too low to be physically plausible. This usually reflects a hard electrical fault such as an open, a short, or high resistance, a loss of excitation, or a failed resolver, rather than the su...

Join TaT to view the complete code information and diagnostic details.

Quick Facts