Code Definition

P0A6D — Drive motor B phase W current low

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0A6D

P0A6D is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A6D is stored, the module has detected a signal or supply voltage lower than the expected operating range.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A6D is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

Drive Motor B is a three phase AC machine, the generator or second traction motor depending on the vehicle, and the control module monitors the current in each phase to keep operation balanced during motoring and regenerative braking. DTC P0A6D sets when the measured current in Phase W is consistently below its calibrated threshold while that phase is commanded to operate, relative to phases U and V. A low reading indicates the Phase W current path is restricted, typically by an open or high resistance phase cable, a poor high voltage connection, or an open or degraded motor winding, though a ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts