Code Definition

P0A75 (335) — Generator A phase W current sub sensor signal open

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Toyota

About P0A75

P0A75 is a generic (obd-ii standard) powertrain diagnostic trouble code recorded for Toyota vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A75 is stored, the module has detected an open (broken or disconnected) electrical path in the monitored circuit; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A75 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

On this Toyota hybrid Generator A uses a main and a redundant sub current sensor on each phase, integrated into the inverter assembly, so the MG ECU can cross check current readings for precise control and functional safety. DTC P0A75 with this sub code sets when the MG ECU detects an open circuit in the Phase W sub current sensor signal line, meaning no valid current data reaches the ECU. The usual causes are a broken or disconnected signal or ground wire, a failed sensor element, or a corroded or unseated connector. With the redundant Phase W feedback lost the hybrid system may reduce or inh...

Join TaT to view the complete code information and diagnostic details.

Quick Facts