Code Definition

P0934 — Hydraulic Pressure Sensor Circuit Low Input

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0934

P0934 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0934 is stored, the module has detected a signal or supply voltage lower than the expected operating range; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0934 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0934 fault code is set when the control module detects a low input condition in the hydraulic pressure sensor circuit. This circuit is integral to systems like the transmission or power steering, where it monitors the hydraulic pressure. A low input condition typically indicates that the voltage or signal from the hydraulic pressure sensor to the control module is below the expected range. This could be due to a fault in the sensor, a short circuit, or issues with the wiring or connectors. The low input can lead to inaccurate hydraulic pressure readings, potentially affecting the performa...

Join TaT to view the complete code information and diagnostic details.

Quick Facts