Code Definition

B2682 — EEC (PCM) Communication fault

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Ford

About B2682

B2682 is a generic (obd-ii standard) body diagnostic trouble code recorded for Ford vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2682 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The Body Control Module or Instrument Cluster has failed to receive expected data or a valid response from the Powertrain Control Module (PCM) over the vehicle communication network. Ford applications use either the Standard Corporate Protocol (SCP) network on older platforms or High Speed CAN on later vehicles, with the PCM acting as a primary data source for engine speed, vehicle speed, coolant temperature, and immobiliser status. B2682 sets when that data stream is absent, corrupted, or times out for a calibrated period, indicating the PCM is either offline, not powered, or unable to transm...

Join TaT to view the complete code information and diagnostic details.

Quick Facts