Code Definition

C006A — Multi axis acceleration sensor

System: Chassis  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About C006A

C006A is a generic (obd-ii standard) chassis diagnostic trouble code. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C006A is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

Because C006A is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This DTC is stored when the ABS or ESC control module detects a malfunction in the multi axis acceleration sensor, also referred to as the longitudinal and lateral acceleration sensor or G sensor. The sensor provides critical vehicle dynamics data for ESC, traction control, and other stability systems. The fault is triggered if the sensor signals are out of range, show implausible values compared to other inputs such as steering angle or yaw rate, or if there is a communication error with the sensor. When this code is set stability and traction control are usually disabled and the ABS, ESC, an...

Join TaT to view the complete code information and diagnostic details.

Quick Facts