Code Definition

P0537 — A/C Evaporator Temperature Sensor Signal Low

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0537

P0537 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0537 is stored, the module has detected a signal or supply voltage lower than the expected operating range; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0537 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This fault code is activated when the Engine Control Module (ECM) or the climate control module detects a lower than expected signal from the A/C evapourator temperature sensor. The sensor monitors the temperature of the air conditioning system's evapourator. A low signal reading might suggest that the sensor is detecting an abnormally low temperature or there is an electrical problem in the sensor circuit. This could lead to incorrect operation of the air conditioning system, as the sensor's readings are vital for managing the cooling efficiency and operation.

Quick Facts