Code Definition

P060F — Internal ECM coolant temperature signal processor error

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P060F

P060F is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P060F is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The fault code P060F is set when the Engine Control Module (ECM) detects an error specifically related to the processing of the coolant temperature signal. This code indicates that the ECM's internal mechanisms for interpreting the engine coolant temperature signal are not functioning as expected. This could be due to a malfunction within the ECM's signal processing circuitry or software, leading to incorrect or unreliable coolant temperature readings.

Quick Facts