Code Definition

P061F — ECM throttle actuator controller calculation performance error

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P061F

P061F is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P061F is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P061F is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The fault code P061F is set when the Engine Control Module (ECM) encounters a discrepancy or malfunction in the calculations related to the throttle actuator control. This error indicates that the ECM's processing of signals and control commands for the throttle actuator is not aligning with expected parameters or desired outcomes. The issue may stem from inaccuracies in the ECM's algorithms, sensor malfunctions, or inconsistencies in the actuator response that the ECM is unable to correctly interpret or control.

Quick Facts