Code Definition

P063F — Engine coolant temperature auto configuration missing

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P063F

P063F is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P063F is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The fault code P063F is set when the Engine Control Module (ECM) identifies that the auto configuration data for the engine coolant temperature system is missing or incomplete. This diagnostic trouble code points to a problem with the coolant temperature system's ability to self-calibrate or configure based on input signals. The absence of proper auto configuration data can lead to incorrect coolant temperature readings or response. This issue may be due to problems within the ECM's software, failures in the coolant temperature sensing system, or issues with data communication or storage relat...

Join TaT to view the complete code information and diagnostic details.

Quick Facts