Code Definition

P0653 — Sensor power supply circuit high - Circuit B

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0653

P0653 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0653 is stored, the module has detected a signal or supply voltage higher than the expected operating range; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0653 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The fault code P0653 is set when the Engine Control Module (ECM) detects a higher than normal voltage level in the sensor reference power supply circuit 'B.' This reference circuit typically provides a specific voltage (often 5 volts) to various sensors. A high voltage condition in this circuit suggests a potential short to power or an internal issue with the ECM. Such a high voltage can lead to incorrect sensor readings, potentially affecting the engine's performance and emissions. The ECM is responsible for monitoring the reference voltage to ensure it remains within the expected range for p...

Join TaT to view the complete code information and diagnostic details.

Quick Facts