Code Definition

P0982 — Shift Solenoid D Control Circuit Low

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0982

P0982 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0982 is stored, the module has detected a signal or supply voltage lower than the expected operating range.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0982 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0982 fault code is set when the control module detects a low voltage condition in the control circuit of Shift Solenoid D. This solenoid is an important part of the automatic transmission system, controlling the hydraulic fluid flow that is essential for engaging or disengaging gears. A low voltage condition in this circuit can indicate an electrical issue such as a short to ground, a decrease in voltage supply, or a fault within the solenoid itself. Low voltage can lead to insufficient activation or operation of Shift Solenoid D, potentially causing transmission issues like delayed gear ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts