Code Definition

P0998 — Shift Solenoid F Control Circuit Low

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0998

P0998 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0998 is stored, the module has detected a signal or supply voltage lower than the expected operating range.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0998 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The fault code P0998 is set when the Transmission Control Module (TCM) detects a low voltage condition in the Shift Solenoid 'F' Control Circuit. This low voltage signal suggests that the electrical current to the solenoid is insufficient for its operation. This condition often points to a potential short to ground in the solenoid circuit or issues related to the wiring harness or connectors that are reducing the voltage supplied to the solenoid.

Quick Facts