Code Definition

B115E (08) — Camera Module Bus Signal/Message Failure

System: Body  |  Type: Manufacturer-Specific  |  Make: Ford

About B115E

B115E is a manufacturer-specific body diagnostic trouble code recorded for Ford vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B115E is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Camera Control Module communicates with other vehicle modules over the CAN bus (or LIN bus on some variants) to share power status, control commands, and image synchronisation data. The camera module supports driver assistance systems such as lane keep assist, park assist, and 360 degree surround view, and relies on continuous network communication with modules like the Body Control Module, gateway, and infotainment unit. DTC B115E:08 is logged when the camera module detects a loss of valid bus messages, repeated CRC or frame errors, or a bus off condition on the network for longer than th...

Join TaT to view the complete code information and diagnostic details.

Quick Facts