Code Definition

B1182 (55) — Tyre Pressure Monitoring System – Not Configured

System: Body  |  Type: Manufacturer-Specific  |  Make: Ford

About B1182

B1182 is a manufacturer-specific body diagnostic trouble code recorded for Ford vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1182 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Tyre Pressure Monitoring System (TPMS) on this Ford uses a dedicated TPMS module (or the Body Control Module on some variants) that communicates with individual wheel mounted radio frequency pressure sensors and reports tyre pressures and sensor health over the vehicle network. During initial setup the module must be configured with the correct number of sensors, wheel locations, pressure thresholds, and unit settings before it can begin monitoring. DTC B1182:55 is stored when the module detects that its TPMS configuration data is missing, never written, or invalid, which normally follows ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts