Code Definition

C0186 — Lateral Acceleration Sensor Circuit Malfunction

System: Chassis  |  Type: Generic (OBD-II Standard)  |  Make: Holden

About C0186

C0186 is a generic (obd-ii standard) chassis diagnostic trouble code recorded for Holden vehicles. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C0186 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

Because C0186 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The Electronic Brake Control Module (EBCM) monitors the lateral acceleration sensor signal to calculate side to side vehicle acceleration for electronic stability control operation. The sensor, often integrated with the yaw rate sensor, reports cornering force so the module can detect understeer or oversteer and intervene. DTC C0186 is set when the module detects an implausible sensor signal, a loss of signal, or a circuit fault such as an open circuit, short to ground, or short to battery for a calibrated period. When this code is set stability and traction control are disabled, the relevant ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts