Code Definition

C13EB — Angle Processing at Start

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Infiniti

About C13EB

C13EB is a manufacturer-specific chassis diagnostic trouble code recorded for Infiniti vehicles. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C13EB is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Vehicle Dynamic Control (VDC) and ABS control module performs an initialisation and plausibility check of the steering angle sensor signal at ignition on or vehicle startup. DTC C13EB is set when the steering angle signal cannot be correctly initialised, is outside the allowable range, or is implausible relative to vehicle stationary conditions during startup. This indicates the control module cannot establish a valid steering angle reference, which is required for stability and traction control operation. The driver may notice the stability control or ABS warning lamp illuminated with tho...

Join TaT to view the complete code information and diagnostic details.

Quick Facts