Code Definition

B210D — Battery Voltage Low

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Jeep

About B210D

B210D is a generic (obd-ii standard) body diagnostic trouble code recorded for Jeep vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B210D is stored, the module has detected a signal or supply voltage lower than the expected operating range.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B210D is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The Body Control Module (BCM) continuously monitors system battery voltage to ensure it remains within a calibrated operating range. DTC B210D is set when the BCM detects battery voltage below the minimum threshold for a defined period, either during key on, engine cranking, or normal operation. Low system voltage can impair module operation, network communication, and control of vehicle electrical functions including lighting, body comfort features, and module wake states. The setting condition is informational about overall electrical system health rather than a fault with a discrete sensor ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts