Code Definition

P2643 (00-27) — Particle Filter Restriction, Soot Accumulation, Bank 1

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Ford

About P2643

P2643 is a generic (obd-ii standard) powertrain diagnostic trouble code recorded for Ford vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P2643 is stored, the module has detected a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P2643 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The Powertrain Control Module (PCM) monitors diesel particulate filter (DPF) loading using a differential pressure sensor across the filter, exhaust temperature inputs, and a calculated soot accumulation model. The DPF traps soot from the diesel combustion process and must periodically regenerate by burning the trapped soot off through controlled high temperature exhaust events. DTC P2643 (sub codes 00 to 27 on Ford applications) is set when the PCM determines that soot accumulation in the Bank 1 particulate filter has exceeded the calibrated threshold and regeneration has not been able to cle...

Join TaT to view the complete code information and diagnostic details.

Quick Facts