Code Definition

P0130 — O2 Sensor Circuit Malfunction (Bank 1 Sensor 1)

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0130

P0130 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0130 is stored, the module has detected a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0130 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0130 fault code is set when the Engine Control Module (ECM) detects a malfunction in the circuit of the oxygen sensor located in Bank 1, Sensor 1. This sensor is typically positioned in the exhaust system before the catalytic converter (upstream). The malfunction can be due to an issue with the sensor itself, such as a failure to produce the correct voltage range, or it could be related to the wiring or connectors that link the sensor to the ECM. The ECM relies on this sensor to monitor the oxygen content in the exhaust gas, which is crucial for maintaining optimal air-fuel mixture. If th...

Join TaT to view the complete code information and diagnostic details.

Quick Facts